Automatic Pocket Welting Machine
PLY-E7203 (Specifications with slanted pocket)
  PDF

* The operation status is shown with illustrations. The working state of stitching, center knife, corner knife and stacker, etc., is displayed for quick confirmation.
* Six types of sewing lengths can be saved.
* The corner knife and center knife can be individually adjusted at the start or end of stitching using the control box.
* Up to ten types can be set for cycle sewing.
* A fault diagnosis monitor is incorporated making it easy to see the faulty section, such as a top dead point fault or center knife rise fault.
* The stitching can be switched between parallel, slanted and trapezoid with a single touch.
* The time one needle is stopped can be adjusted between 1 and 9mm independently for the start of stitching side and end of stitching side.
* The height of the T-shape ruler can be adjusted with a single touch. (By mounting an option)
* The flap holder operates alternately. (The flap instructed side is first.) (By mounting an option)
 
PLY-E7191  
Stitch type Parallel installed
Slant installed
Trapezoid installed
Stitch length(mm) 20 - 200
(Corner knife:30 - 200)
Setting of stitch length 6 kinds (Available setting by each 1mm)
Flap sewing installed
Cycle sewing Stitch type : 5 kinds
Stitch length : 6 kinds
(Max:10 kinds)
Max. speed (rpm) Selecting 1600, 2000 and 2200
(800rpm when other needle stops.)
Sewing pitch (mm) Condense sewing: 1.0, 1.5, 2.0
Reverse stitch: 1.5, 2.0, 2.5, 3.0
Ordinary sewing: 1.5, 2.0, 2.5, 3.0
Knife system Center knife: Upper knife system
Tab knife: Push up mechanism
Reverse stitch Select: condence / reverse stitch
Hook Horizontal rotating hook / Large
Needle DPx17#16(#14 - #18)
135x17#100(#90 - #110)
Needle gauge (mm) Standard 9, 10, 12
Special 14, 16, 18, 20, 25.4, 31.8
Center knife Upper knife system
Corner knife Ceramics : 1 pair
Stacker Standard YS-2 (Pick-up type)
Option YS-1 (Bar type)
Mass (kg) 200
 

All Rights Reserved, Copyright (C) Meiryo Technica Corporation 2003.