Automatic Pocket Welting Machine
PLY-E7191 (Specifications without flap)
PLY-E7194 (Specifications with flap)
  PDF

* The operation status is shown with illustrations. The working state of stitching, center knife, corner knife and stacker, etc., is displayed for quick confirmation.
* Six types of sewing lengths can be saved.
* The corner knife and center knife can be individually adjusted at the start or end of stitching using the control box.
* Up to ten types can be set for cycle sewing.
* A fault diagnosis monitor is incorporated making it easy to see the faulty section, such as a top dead point fault or center knife rise fault.
 
PLY-E7191  
Model PLY-E7191 PLY-E7194
Stitch type Parallel installed installed
Slant - -
Trapezoid - -
Stitch length(mm) 20 - 200
(Corner knife:30 - 200)
Setting of stitch length 6 kinds (Available setting by each 1mm)
Flap sewing - installed
Cycle sewing Stitch length : 6 kinds
(Max:10 kinds)
Max. speed (rpm) Selecting 1600, 2000 and 2200
Sewing pitch (mm) Condense sewing: 1.0, 1.5, 2.0
Reverse stitch: 1.5, 2.0, 2.5, 3.0
Ordinary sewing: 1.5, 2.0, 2.5, 3.0
Knife system Center knife: Upper knife system
Tab knife: Push up mechanism
Reverse stitch Select: condence / reverse stitch
Hook Horizontal rotating hook / Large
Needle MTx190#16(#14 - #18)
Needle gauge (mm) Standard 9, 10, 12
Special 14, 16, 18, 20, 25.4, 31.8
Center knife Upper knife system
Corner knife Ceramics : 1 pair
Stacker Option
Mass (kg) 190
 

All Rights Reserved, Copyright (C) Meiryo Technica Corporation 2003.