Electronic Controlled Pattern Sewing Machine (PLK-G Series)
Troubleshooting — Operation Panel —
Please click each question item.
How do I reinstall the system when an error occurred?
Insert the USB memory that contains the system. While pressing the F key on the control panel, turn the power ON to enable the selection of language and model setting, and the system can be restored to default.
When the power is turned ON, “E-006 X axis A phase current error” and “E-007 Y axis A phase current error” are displayed.
-
①Is the external clamp position filling up the area?
Move the external clamp to the center area with your hand.
-
②Are the X axis and Y axis encoder connector inserted firmly?
Check the connector.
When the power is turned ON or during origin point restoration, “E-053 X motor encoder error” and “E-054 Y motor encoder error” are displayed.
Are the X axis and Y axis encoder connectors inserted the other way around?
Check the connector.
When the power is turned ON, “M-038 sewing machine head tilt is detected” is displayed.
Locate the machine head tilting detection switch on the rear of the head section, and check if it is detected.
If it shows detected, turn the limit switch ON.
Click here for attaching the sewing machine tilting detection switch.
