Motor Device
Basic Operations
Please click each question item.
I want to switch from the normal mode to each mode.
Switching to each mode is possible from the operation panel.
Click here for switching from the normal mode to each mode.
I want to work in standing sewing machine.
Check “Working in Standing Sewing Machine”.
I want to operate with variable speed.
It can be set with the program mode.
Go to the program mode C, and set the function “PDS.” ON.
I want to use slow starter.
Check the display and the name of each key at the normal mode.
I want to operate without the detector.
Check “The Detector not Working” and “Operate the Sewing Machine without the Detector”.
Click here for “The Detector not Working” and “Operate the Sewing Machine without the Detector”.
I want to do a half stitch sewing with a touch back.
Check “Operating a Half Stitch Sewing with a Touch Back”.
Click here for “Operating a Half Needle Sewing with a Touch Back”.
I want more penetration force.
Try making the motor pulley's diameter smaller or take measures by using the program mode.
Measures through the program mode
①Go to the program mode P (↓+↑), and set the function “RU” ON.
②Go to the program mode A (↓+A), and set the setting value of function “GA” to H.
③Go to the program K (↓+↑+A+C), and set the function “HWG” ON.
The number of stitch for backtacking does not match.
Check the setting of the number of stitch correction for backtacking.
Click here for the setting of the number of stitch correction for backtacking.
I want to decelerate the speed on backtacking.
Check the setting method of front stop stitch speed and rear stop stitch speed.
I want to have the same number of stitches in backtacking at the start and end of stitch.
Check the setting of the number of stitch for backtacking.
Click here for the setting of the number of stitch for backtacking.
I want to set the brake weaker.
Check the setting method of weaker brake.
I want to know how to view the digital display.
Check the digital display list table.
I want to set the model.
Check how to use easy setting of program mode [1].
I want to save the setting data. Also, I want to read the saved data.
Check “Saving Setting Data”.
I want to know the compatibility of the control panel and detector.
Check the detector compatibility.